The LoPro is made for those tight spaces and shallow bilges. With two automated modes and a full rotating discharge body making it easy to install and use. Can be used for horizontal or vertical mounting. Mode 1 will engage the pump when the water level reaches the desired level of either 2" or 1.3". Mode 2 will check for water every 2-1/2 minutes. This pump has no sensors and will need either a float switch or a panel switch for operation. Included with this pump are the following components 3/4" straight, 3/4" right angle, 1", 11/8"-9mm, 25mm, 28mm.
Specifications: 900 GPH flow rate
12V Fuse
7.5 Amp
Amp Draw 4 Amp
